I have installed a Netgear Nighthawk router in my home. I got the setup done using the Nighthawk login admin details on the Nighthawk mobile app. The router all of a sudden began showing blinking Power LED on it. This all happened after a power outage that occured recently.
Does this scenario sound similar to yours? Do you also see blinking Power light on your Netgear router? If yes is what you are saying right now then you should read this post till the end. Here, you will get the best fixes to ditch the blinking power light.
Nighthawk Router Power LED Blinking: Resolved
If you ever notice the Power light on your Netgear router showing you an abnormal behavior, the very first thing that should come to mind is that there’s an issue with the power supply. Have you checked the same? Before you head to the troubleshooting process given below, check the power connection to the Netgear router. Examine the cable and the socket properly. There ought to be no damage to them.
In case the power socket that you’ve used is broken or is not working well, then put to use any other socket to supply power to the router. Make sure that the power supply is non interrupting.
We suggest you use the same cable that came with the Netgear WiFi router in its package to supply power to it. Avoid using any other cable.
If you are still seeing a blinking Power LED despite mending the power connection, then try the solutions given ahead.
1.Power Cycle the Network
This is a versatile trick that works like magic to resolve issues with technical devices. A power cycle process is very simple. Let us tell you the process.
- Power down the Netgear router. Do take out its power cable from the socket.
- Follow the first step again, but this time it’s the modem.
- If there’s a cabled connection between the router and modem, then remove the LAN cable also.
- Wait for some time now.
- Begin again by inserting the LAN cable into the devices.
- Plug in the modem first and toggle its Power button.
- Next, wait for 2 minutes and plug in the power up the router.
- We suggest you follow the same sequence.
Once the router boots up, check its Power LED. If it’s not blinking anymore, then connect your PC or phone to its network to perform Netgear Nighthawk login and update its firmware.
2.Use a UPS
If there are fluctuations in power supply, then also you will have issues with your Netgear WiFi router. You can use a UPS in such an event. UPS helps you get an uninterrupted power supply to the router. Use it and supply adequate power to the Netgear Nighthawk router.
3.Replace the LAN Cable
The cable that is used to connect the router and the modem if is not in good condition, then also you will have light on your router blinking. Verify the same and check its condition. If it is damaged then use another cable now.
While you are connecting the two devices, you must make sure that the cable is inserted in the right ports and is inserted tightly. There has to be no loose connection.
4.Reset the Router
Resetting the router is suggested if it keeps on blinking even after you have applied the solutions discussed here. Resetting will delete the customized settings on the router. The factory settings will be restored after that.
Use the Reset button on the router and perform the factory reset now. After this, access the Nighthawk login page and use the admin details to log in. You can use the Netgear app or web interface via mywifiext.net or IP. Complete your router’s setup from scratch by executing the instructions appearing on the admin dashboard.
Let’s Wrap it Up
Once the Netgear Nighthawk router is reset and set up once again, we are sure the Power LED will not be blinking anymore. The router should work perfectly fine now without giving you any trouble. You should now connect various devices in your home to the router’s network to enjoy internet access. We suggest you keeping your router’s firmware up to date to avoid any issues and make the most out of it.
